THE SIMRIG SR1

The SIMRIG SR1 is our first motion system. Since 2018 it has sold to all corners of the world. All units are designed, built, and tested by SIMRIG in Sweden.
The SIMRIG SR1 is developed for maximum immersion and ease of use. With it’s small footprint it mounts to your existing aluminium extrusion rig. The electronics control unit is small enough to mount under your seat. It connects directly to your computer through USB. The power supply operates on 100-240 V mains.
The system features three degrees of freedom (3-DOF): pitch, roll, and heave. With pitch and roll the system can simulate acceleration, braking, and turning. It can also follow the track geometry; for example by pitching forwards while driving downhill. With heave the system can push the rig upwards when hitting curbs and bumps in the road.
The SIMRIG SR1 is accompanied by SIMRIG Control Center. This software control the motion system by interpreting the position and acceleration of the simulated vehicle. It supports all major simulation titles.
Mounting Options
SIMRIG SR1 is compatible with aluminum rigs built using 60×20, 40×40, and 80×40 mm aluminum extrusions. Other sizes are available on request.
Four 20×20 mm aluminum profiles and four plastic brackets are required to attach SIMRIG SR1 to an aluminum rig. These are included when your order a system.
The four 20×20 mm aluminum profiles are mounted in pairs. Two at the front of the rig and two at the back. Each pair holds two SIMRIG SR1 actuators.
The plastic brackets are specifically designed to attach to either 60×20, 40×40, or 80×40 mm aluminum profiles. These profiles differ in height and therefore require a matching bracket. Please specify which rig you intend to use while ordering.
The maximum rig width is 620 mm. See documentation for more details.
Maximum Load
For best performance, longevity, and user experience, the maximum load is set to 175 kg. The maximum load includes the rig, the driver, other peripherals, and additional weight actuated by the SIMRIG SR1 motion system.
When the SIMRIG SR1 is attached to a lightweight rig, such as the SRD-MOTUS ULTIMATE (it only weighs 21 kg) there is about 154 kg left for driver, seat, and peripherals.
IN THE BOX
A complete motion system:
- 4x SIMRIG SR1 Linear Actuator
- 1x SIMRIG SR1 ECU
- 1x 500W Power Supply (100-240V)
- 1x Emergency Stop
- 4x Linear Actuator Cable (1m)
- 1x Power Cable (C13)
- 1x USB Cable (3m)
- 1x Low Voltage Power Cable (2m)
- 1x SIMRIG Control Center (download)
- Assorted screws and T-nuts
And mounting brackets for your choice of rig:
- 4x SIMRIG SR1 Bracket
- 4x Aluminium Profile 780x20x20 mm
- 4x Aluminium Angle Brackets
- 4x Profile Cover
- Assorted screws and T-nuts

COMPATIBILITY
Minimum System Requirements
- Operating System
- Windows 10/11 (64-bit)
- Processor
- A modern Intel i5 or equivalent
- Runtime
- .NET 4.6.1 and Visual C++ Redistributable 2017
Supported Simulators
These simulators are currently supported, with more on the way.
- American Truck Simulator
- Assetto Corsa
- Assetto Corsa Competizione
- Automobilista
- Automobilista 2
- BeamNG.drive
- DiRT 4
- DiRT Rally
- DiRT Rally 2.0
- Euro Truck Simulator 2
- Digital Combat Simulator (DCS)
- F1 2017
- F1 2018
- F1 2019
- F1 2020
- F1 2021
- Forza Horizon 4
- Forza Horizon 5
- Forza Motorsport 7
- GRID 2019
- GT Legends
- GTR2
- iRacing
- KartKraft
- Live for Speed
- Microsoft Flight Simulator 2020
- NoLimits 2
- Project CARS
- Project CARS 2
- Project CARS 3
- RACE 07
- Race Room Racing Experience
- Race
- rFactor2
- Richard Burns Rally
- WRC 7
- WRC 8
- WRC 9
- WRC 10
TECHNICAL SPECIFICATION
- Max load 1*
- 175 kg
- Travel
- 70 mm
- Speed
- 100 mm/s (at max load)
- Accuracy
- 0.1 mm
- Latency
- 7 ms
- Power 2*
- 500 W
- Interface
- USB 2.0 (Mini-B)
- OS
- Windows 10/11 (64-bit)
- Mounting 3*
- Aluminium rig 60×20, 40×40, 80×40 mm
(80×40 profiles are sometimes called 80×20 in United States)
- Cooling
- Passive
- Emergency stop
- Included
- Package dimensions
- 74 cm x 58 cm x 19 cm
- Package weight
- 20 kg
- Max load of 175 kg includes driver and rig
- Power supply operates around the world (100-240 V, 50/60 Hz)
- For mounting options see documentation
Reviews
There are no reviews yet.